 |
Cisco Catalyst C3KX-NM-10G 4 Port 10GbE SFP+ Network Expansion Module
CISCO
US$310
New
In Stock
2 kg
| Warranty: | 3 Years Warranty 3 Years Warranty 100% Moneyback 100% Moneyback Free After-Sales Service Free After-Sales Service |
|---|---|
| Payment: | |
| Quantity: | |
10-Gigabit Ethernet Network Module
| 1 | Network module | 4 | LEDs |
| 2 | 1-Gigabit Ethernet SFP slots | 5 | Captive screws |
| 3 | 1-Gigabit or 10-Gigabit Ethernet SFP+ slots |
The module has four slots. Two slots support only 1-Gigabit SFP modules. Two slots support either 1-Gigabit SFP or 10-Gigabit SFP+ modules.
Note 
The GLC-T SFP is not supported on the SFP+ slots of C3KX-NM-10G.
The four slots are grouped as two pairs, with each pair consisting of one SFP slot and one SFP+ slot. Each pair supports either two 1-Gigabit SFP modules or one 10-Gigabit SFP+ module. A 10-Gigabit SFP+ module cannot operate at the same time as the corresponding 1-Gigabit SFP module in the pair.
Supported combinations of SFP and SFP+ modules:
•Slots 1, 2, 3, and 4 with 1-Gigabit SFP modules
•Slots 1 and 2 with 1-Gigabit SFP modules and Slot 4 with one 10-Gigabit SFP+ module
•Slot 2 with one 10-Gigabit SFP+ module and Slots 3 and 4 with 1-Gigabit SFP modules
•Slot 2 and Slot 4 each with 10-Gigabit SFP+ modules
A 10-Gigabit SFP+ module takes precedence over a 1-Gigabit SFP module except when an SFP module is first inserted in Slot 1 and has link. When you insert an SFP+ module in Slot 2, the SFP in Slot 1 retains link. The SFP+ module in Slot 2 does not operate.
When the SFP module in Slot 1 is shutdown, loses link, or is removed, the SFP+ module in Slot 2 turns on. The SFP module in Slot 1 does not work as long as an SFP+ module is in Slot 2, whether it has link up or not.
The same precedence applies to Slots 3 and 4.
10-Gigabit Ethernet Network Module
| 1 | Network module | 4 | LEDs |
| 2 | 1-Gigabit Ethernet SFP slots | 5 | Captive screws |
| 3 | 1-Gigabit or 10-Gigabit Ethernet SFP+ slots |
The module has four slots. Two slots support only 1-Gigabit SFP modules. Two slots support either 1-Gigabit SFP or 10-Gigabit SFP+ modules.
Note The GLC-T SFP is not supported on the SFP+ slots of C3KX-NM-10G.
The four slots are grouped as two pairs, with each pair consisting of one SFP slot and one SFP+ slot. Each pair supports either two 1-Gigabit SFP modules or one 10-Gigabit SFP+ module. A 10-Gigabit SFP+ module cannot operate at the same time as the corresponding 1-Gigabit SFP module in the pair.
Supported combinations of SFP and SFP+ modules:
•Slots 1, 2, 3, and 4 with 1-Gigabit SFP modules
•Slots 1 and 2 with 1-Gigabit SFP modules and Slot 4 with one 10-Gigabit SFP+ module
•Slot 2 with one 10-Gigabit SFP+ module and Slots 3 and 4 with 1-Gigabit SFP modules
•Slot 2 and Slot 4 each with 10-Gigabit SFP+ modules
A 10-Gigabit SFP+ module takes precedence over a 1-Gigabit SFP module except when an SFP module is first inserted in Slot 1 and has link. When you insert an SFP+ module in Slot 2, the SFP in Slot 1 retains link. The SFP+ module in Slot 2 does not operate.
When the SFP module in Slot 1 is shutdown, loses link, or is removed, the SFP+ module in Slot 2 turns on. The SFP module in Slot 1 does not work as long as an SFP+ module is in Slot 2, whether it has link up or not.
The same precedence applies to Slots 3 and 4.
